Jeep Grand Cherokee Remote Start Not Working. Check the hood switch, the truck won't remote start if the hood is open, or popped. Sounds a bit fishy to me.
Insert your key into the jeep's ignition cylinder, and then turn the key to the run position. If that hood switch is not making contact, she'll just beep at you. Wait for the car's automatic chiming sound to stop before proceeding.
Table of Contents
Not The End Of The World, But A Great Option To Have When Its Working.
My heated steering wheel and heated and cooled seats will automatically turn on. The 2015 jeep cherokee has 1 problems reported for remote car start not working. I lost remote start on my 2011 gc because of the hood switch and i now see that one way to defeat start/stop is to remove the hood switch.
Check The Hood Switch, The Truck Won't Remote Start If The Hood Is Open, Or Popped.
Remote start also will not work if you have an active dtc or you are low on fuel. It sounds like you have an aftermarket remote start, because you a) shouldn't have 4 remotes, you should only have 2 and b) the horn shouldn't be sounding the first time you hit the remote, regardless of what the dealer is telling you. Insert your key into the ignition and put it in one position.
The Most Common Causes That Hinders Normal Starting Operation Of Your Grand Cherokee Are Dead Key Fob Battery, Dead 12V Battery, Corrosion On Battery Terminals, Bad Alternator, Clogged Fuel Filter, Broken Starter, Blown Fuse, Empty Gas Tank, Immobilizer Error Or Any Fault In The Electrical System.
Remote starter on my 2015 jeep cherokee doesn't work. If the engine stalls or rpm exceeds 2500 ; Any vehicle door ajar ;
A D V E R T I S E M E N T S.
I've checked everything that can keep it from working to my knowledge. • battery at an acceptable charge level • fuel meets minimum requirement • shift lever in park • doors closed So i had an issue where my jeep key fob not working.
I Had To Bend Mine Down A Few Degrees For It To Work Correctly
3 turn the key to the run position and aim the keyless remote at the steering wheel. Press and hold the lock button for five seconds. Vehicle fails to remote start or exits remote start prematurely: