You are currently viewing How To Turn Off Gas Fireplace Pilot Light

How To Turn Off Gas Fireplace Pilot Light

  • Post author:
  • Post category:News
  • Post comments:0 Comments

How To Turn Off Gas Fireplace Pilot Light. The firebox may not be designed to take the more intense heat of a wood fire, and the flue and chimney might not be able to handle the increased smoke. To turn off your fireplace’s pilot light, you need to follow the steps below:

Gas Fireplace Pilot Lights But Wont Turn On Lighting Ideas
Gas Fireplace Pilot Lights But Wont Turn On Lighting Ideas from decorlighting.port-media.org

If there is no button present, then it will be necessary to light the pilot manually. Electronic ignition fireplace pilot lights will turn off automatically when the main burner flames turn off. To avoid accidentally turning off the pilot light when turning off the burner, there is generally a mechanical block to prevent turning the valve all the way to the off position.

If There Is No Button Present, Then It Will Be Necessary To Light The Pilot Manually.

How to turn off pilot light on a gas fireplace. If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. How to turn off pilot light on a gas fireplace.

Turn The Dial So The Arrow Or Mark On Top Points To The Off Position.

The pilot should start as soon as the flame is close enough. Now press the knob, or a button near the knob, to get gas flowing to the pilot light. When your pilot light remains on, a small amount of heat is generated.

Pilot Light Systems Are The Most Common Reason Gas Fireplaces Fail To Light, So Check The Main Gas Valve To Make Sure The Gas Is Turned On.

Following the above steps, you will easily be able to turn off your fireplace’s pilot light. To turn off the pilot light on a gas fireplace turn the. It is necessary to push.

Then, Rotate The Valve To The ‘Off’ Position And Wait For A Few.

All you have to do is open the front of your fireplace, turn the pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well. To avoid accidentally turning off the pilot light when turning off the burner, there is generally a mechanical block to prevent turning the valve all the way to the off position. You may need to press down on the knob to get it to turn.

If You Notice Your Pilot Light Has Gone Out, The First Thing You Should Do Is Shut Off The Gas Feed And Wait A Few Minutes.

Once the pilot light ignites, the flames will turn to full fire and remain in 'manual mode'. Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. Turn off the pilot knob;

Leave a Reply