How To Paint Over Stained Wood Doors. 5 easy steps to paint over stained wood. You may need 2 coats of paint to get the coverage you desire.
Sand until the shiny surfaces are all dulled. Then, follow these general preparatory steps for painting over stain: While sanding down to bare wood is not necessary, sanding through the polyurethane coat and scuffing up the surface is required to give the primer something to grip to.
Table of Contents
After Sanding, We Would Recommend Priming Everything With A Stain Blocking Primer To Prevent Any Discoloration Bleeding Through The Top Coat Of Paint.
Shinny glossy surfaces are usually difficult. Top coat you can use a top coat of polyurethane over your painted wood if you wish, however it is unnecessary if you use a high quality paint. 5 easy steps to paint over stained wood.
Here Is The Stained Door Before We Painted It White.
Turn the door over to work on the other side. Click to see full answer. Find out how you ca.
Let Each Coat Dry Thoroughly Before Applying The Next.
The doors in our old house were all dark wood stain, dated and ugly! Then, follow these general preparatory steps for painting over stain: Sand until the shiny surfaces are all dulled.
Apply A Base Coat Of Primer To The Door.
3 unless the stained door you are. Run sandpaper over the door so that it gives a surface the paint can adhere to. This will stop the wood from absorbing the paint and allow for a more even coat.
Put On A Dust Mask.
Paint on your top coat in the same manner as the sealer, using fairly long brush strokes. You may need 2 coats of paint to get the coverage you desire. Apply it evenly across both sides and around all edges using a good quality brush.